keywords: ip pbx voip gateway gsm gateway



The forum is in read only mode.
× Questions about A400/800/1200 Analog Interface Card

How to Use Timing Cable

14 years 2 months ago #5302 by suhor
I want to install 2 A1200P card in a PC. First card contains 12 FXS and the second card contains 12 FXO. In future I want to add another A1200P card with 12 FXO. All lines will be used for voice only. Do I have to use the timing cable?

Thank you
14 years 2 months ago #5303 by xin.liu
you need not to use the timeing cable.

14 years 4 weeks ago #5791 by antix
I have one A1200P with 12 FXO modules, A800P with 8 FXS modules and one TDM400P with 4 FXO module,
do i need timing cable?
14 years 4 weeks ago #5793 by Denins.Den
you don't need to use the timing cable
13 years 9 months ago #6263 by fifer
I have an A1200P with 4 FXS ports (incoming) only used for some incoming calls.We also have a D210P with 2 PRI T-1's connected which is our main trunkage for both incoming and outgoing calls.
This is in a single Asterisk box: with the spandsp, and the built in app_fax.

I have fax reception working fairly well but incoming fax reception fails sometimes and every once and a while a page gets cut short.

It all looks like it may be timing related or some other quality issue.

The A1200P is not involved in fax reception or sending at all for now.

I am getting buffer recynce issues I think are only related to the A1200P tough, at least 1 a minute.

Does this sync cable have any place in this situation?

Are there any other recommendations?
13 years 9 months ago #6267 by svolta
Please send you ssh to me by Email, my Email : This email address is being protected from spambots. You need JavaScript enabled to view it.
Time to create page: 0.038 seconds
Powered by Kunena Forum