keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about B100/200/400/800 ISDN BRI Cards

B400 and no audio on incoming call

12 years 11 months ago #7072 by svolta
Hi,
Did it only span 4 got this issue? Did you try swap the ISDN line 4 with the others?
12 years 11 months ago #7074 by gerapcik
you are right.
i have connected to span 1 and seems to be working.
why doesnt work on span4? what's the difference?

and what is strange on span1 i have signalling = bri_cpe


12 years 11 months ago #7075 by svolta
Hi,
Please send ssh to me, I should check it! My Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
12 years 11 months ago #7076 by Joe.Yung
Hi,

Try to replace signalling's value on span 4 by bri_cpe.

12 years 11 months ago #7084 by gerapcik
i have tried to use signalling = bri_cpe on span 4, but in this way i have no signal in. on CLI i have no information about incomming call.
12 years 11 months ago #7085 by Joe.Yung
Hi,

Enable the debug parameter in file /etc/asterisk/logger.conf, starting asterisk by `asterisk -vvgc -d`. Increase the verbose value by `core set verbose 10000`. Meanwhile enable the debug by ` core set debug on span X` on the console. And see what happens.

Time to create page: 0.040 seconds
Powered by Kunena Forum