keywords: ip pbx voip gateway gsm gateway



The forum is in read only mode.
× Questions about D130/230/430/830/1630 Advanced T1/E1/J1 PRI Cards

D130 Not being detected by Dahdi

11 years 4 days ago #8948 by chunlei.yi
11 years 3 days ago #8949 by leehchua
Hi Chunlei
Have followed all the steps
..downloading openvox_dahdi-linux-complete-2.6.2*
..done all the make etc
cd /usr/src/dahdi-linux-complete-2.6*
make && make install && make config
dahdi_genconf modules
cd /usr/src/libpri*
make && make install
cd /usr/src/asterisk-11.4.0
./configure --libdir=/usr/lib64 && make menuselect && make && make install
make samples ; make config
modprobe dahdi
modprobe opvxd115
vim /etc/dahdi/system.conf
...change us to au
dahdi_cfg –vvvvvv
dahdi_cfg -v
service dahdi start
service asterisk start
[align=left][font=Helvetica, Arial, sans-serif]

[align=left][font=Helvetica, Arial, sans-serif]...all seems fine. But when I run asterisk -rvv ... dahdi show channels ... it shows only 1 pseudo channel [/font][/align]
[align=left]Chan Extension Context Language MOH Interpret Blocked State Description [/align][align=left] pseudo default default In Service
[/align]I am at a loss and would appreciate any pointers/help.

Thank you

i] Last edited by leehchua at 2013-7-16 22:25 [/i
11 years 3 days ago #8951 by chunlei.yi

pls add the following line at the end of /etc/asterisk/chan_dahdi.conf,then restart asterisk to try
#include dahdi-channels.conf
11 years 3 days ago #8952 by leehchua
Hi Thank you... really great support from this forum. We have managed to compile and install dahdi, asterisk from the help we have received here. We are getting there. The current state is that all seems to work well with our E1 service. We can make calls out. GREAT! We just cannot receive calls. Checking with our E1 service provider they can see that the call coming in to us has been delivered to the E1 service but we are not accepting it. It looks like it is a configuration problem to enable us to receive calls on our E1 service. Again...any quick pointers on how to fix this would be very much appreciated. Cheers
11 years 3 days ago #8953 by chunlei.yi

the following shows is the "dahdi-channels.conf" config,the default context for incoming call is from-pstn,pls check your dialplan and confirm it
; Span 1: D115/D130/0/1 "D115/D130 (E1|T1) Card 0 Span 1" (MASTER)
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
context = default
group = 63

if still have problem, send the teamviewer information to me, i help you to check it remotely
11 years 3 days ago #8954 by leehchua
Thank you very much. We have it resolved. It's all to do with the conf files. Thank you for your assistance. Much appreciated.

Time to create page: 0.042 seconds
Powered by Kunena Forum