OpenVox iAG400 Series Analog VoIP Gateway
Supports 4 FXS/FXO ports;
Use standard SIP protocol;
Specially designed for SMBs and SOHOs;
Compatible with leading IMS/NGN platform, IPPBX and SIP servers.
Request a Quote-
Specifications
OpenVox iAG400 Series Analog VoIP Gateway supports 4 FXS/FXO ports. With features of small size, exquisite enclosure and high performance, the iAG Analog VoIP Gateway is specially designed for saving space and maximizing cost savings, it is ideal for SMBs and SOHOs.
It can be configured for different country uses, provides a wide selection of codecs including G.711A、G.711U、G.729、G.722、G.726. The iAG Analog VoIP Gateways use standard SIP protocol and fully compatible with leading IMS/NGN platform, IPPBX and SIP servers.
Technical Specifications:
Models iAG400-S iAG400-O Ports 4 FXS ports 4 FXO ports Ethernet Ports 2 * 10/100Mbps Ports Weight 176g Dimension 150mm*100mm*28.7mm Power Supply 12V DC/1A Maximum Power Consumption 8W Operation Temperature 0°C ~ 50°C Operation Humidity Range 10% ~ 90% NON-CONDENSING Storage Temperature Range -20°C ~ 70°C Short/Long Haul Ring Load 2 REN, up to 3km on 24AWG line Certification CE Software & Platform:
- Linux OS
-
Features
Physical Interfaces (Capacity & Ethernet Interfaces)
- 4 FXS with RJ11
- 4 FXO with RJ11
- 1*WAN, 10/100Mbps, RJ-45
- 1*LAN, 10/100Mbps, RJ-45
Voice & FAX
- G.711A/U, G.729A, G.722, iLBC
- Comfort Noise Generation (CNG)
- Modem/POS
- Adaptive (Dynamic) Jitter Buffer
- Programmable Gain Control
- DTMF mode: Signal/RFC2833/INBAND
- T.38/Pass-through
- Echo Cancellation (G.168), with up to 128ms
Call Features
- Call Waiting
- Blind Transfer
- Attend Transfer
- Call Forward on Busy
- Call Forward on No Reply
- Unconditional Call Forward
- Warm/lmmediately Hotline
- Message Waiting Indicator
- SlP registration to different servers
- Call Hold
- Do-not-disturb
- 3-Way Conference
- Speed Dial
FXS
- Connector: RJ11
- Dial Mode: DTMF and Pulse
- Pulse: 10 and 20 PPS
- Caller ID: DTMF/FSK CLI Presentation
- Max Cable Length:3 km
- Reversed Polarity
- Programmable Call Progress Tone
FXO
- Connector: RJ11
- Dial Mode: DTMF/Pulse Dialing
- Caller ID: FSK, DTMF
- Polarity Reversal
- Answer Delay
- Busy Tone Detection
- No Current Detection
Software Features
- Hunting Group
- Web ACL
- Telnet ACL
- Action URL
- PPPoE
- OpenVPN
- Digitmap
- Routing Rules based Prefixes
- Caller/Called Number Manipulation
VOIP (Protocol)
- SIP v2.0 (UDP/TCP), RFC3261
- SDP, RTP(RFC2833), RFC3262, RFC3263, RFC3264, RFC3265, RFC3515, RFC2976, RFC3311
- RTP/RTCP, RFC2198, RFC1889
- IPv4 and lPv6
- Outbound Proxy
- RFC2806 TEL URI
- RFC3581 NAT, rport
- VLAN 802.1P/802.1Q
- RFC4028 Session Timer
- DNS SRV/A Query/NATPR Query
- NAT: STUN, Static/Dynamic NAT
Maintance
- SNMP v1/v2/v3
- Auto Provisioning
- Web Configuration
- Backup/Restore
- Firmware Upgrade via Web
- CDR
- IPOE
- Syslog(Emerg, alert, critical, error, warning, notice, info, debug)
- Ping/Tracert Test
- Network Capture
- NTP/Daylight Saving Time
- lVR local Maintenance
- Cloud-based Management
-
Demo
Username: Viewer
Password: Viewer123!