keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about A400/800/1200 Analog Interface Card

A400P with 2 FXO call out works on both but call in on only one.

13 years 2 months ago #6745 by micpet
Trixbox2.8.0.4 with Openvox G400P and A400P

The A400P. CH1 is FXO v1.2 andCH2 is FXO v1.3 recently purchased from Openvox. I can call out on both but when I call in on theCH1 (v1.2) the caller phone rings once and then quiet. The phones in the ringgroup keep ringing. If i pickup no tone then a dial tone... here is the log

-- Starting simple switch on 'DAHDI/1-1'
[Mar 11 08:58:13] WARNING[5514]: chan_dahdi.c:7829 ss_thread: CallerID returned with error on channel 'DAHDI/1-1'
[Mar 11 08:58:13] WARNING[5514]: chan_dahdi.c:7829 ss_thread: CallerID returned with error on channel 'DAHDI/1-1'
-- Executing [s@from-pstn:1] Set("DAHDI/1-1", "__FROM_DID=s") in new stack
-- Executing [s@from-pstn:2] Gosub("DAHDI/1-1", "app-blacklist-check,s,1") in new stack
-- Executing [s@app-blacklist-check:1] GotoIf("DAHDI/1-1", "0?blacklisted") in new stack
-- Executing [s@app-blacklist-check:2] Return("DAHDI/1-1", "") in new stack
-- Executing [s@from-pstn:3] ExecIf("DAHDI/1-1", "1 ?Set(CALLERID(name)=)") in new stack
-- Executing [s@from-pstn:4] Set("DAHDI/1-1", "__CALLINGPRES_SV=allowed_not_screened") in new stack
-- Executing [s@from-pstn:5] Set("DAHDI/1-1", "CALLERPRES()=allowed_not_screened") in new stack
-- Executing [s@from-pstn:6] Goto("DAHDI/1-1", "ext-group,600,1") in new stack
-- Goto (ext-group,600,1)
-- Executing [600@ext-group:1] Macro("DAHDI/1-1", "user-callerid,") in new stack
-- Executing [s@macro-user-callerid:1] Set("DAHDI/1-1", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("DAHDI/1-1", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("DAHDI/1-1", "1?Set(REALCALLERIDNUM=)") in new stack
-- Executing [s@macro-user-callerid:4] Set("DAHDI/1-1", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:5] Set("DAHDI/1-1", "AMPUSERCIDNAME=") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("DAHDI/1-1", "1?report") in new stack
-- Goto (macro-user-callerid,s,10)
-- Executing [s@macro-user-callerid:10] GotoIf("DAHDI/1-1", "0?continue") in new stack
-- Executing [s@macro-user-callerid:11] Set("DAHDI/1-1", "__TTL=64") in new stack
-- Executing [s@macro-user-callerid:12] GotoIf("DAHDI/1-1", "1?continue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] NoOp("DAHDI/1-1", "Using CallerID "" <>") in new stack
-- Executing [600@ext-group:2] GotoIf("DAHDI/1-1", "1?skipdb") in new stack
-- Goto (ext-group,600,4)
-- Executing [600@ext-group:4] Set("DAHDI/1-1", "__NODEST=") in new stack
-- Executing [600@ext-group:5] Set("DAHDI/1-1", "__BLKVM_OVERRIDE=BLKVM/600/DAHDI/1-1") in new stack
-- Executing [600@ext-group:6] Set("DAHDI/1-1", "__BLKVM_BASE=600") in new stack
-- Executing [600@ext-group:7] Set("DAHDI/1-1", "DB(BLKVM/600/DAHDI/1-1)=TRUE") in new stack
-- Executing [600@ext-group:8] Set("DAHDI/1-1", "RRNODEST=") in new stack
-- Executing [600@ext-group:9] Set("DAHDI/1-1", "__NODEST=600") in new stack
-- Executing [600@ext-group:10] Set("DAHDI/1-1", "RecordMethod=Group") in new stack
-- Executing [600@ext-group:11] Macro("DAHDI/1-1", "record-enable,205-200-204-201,Group") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("DAHDI/1-1", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("DAHDI/1-1", "recordingcheck,20110311-085813,1299848286.102") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
-- <DAHDI/1-1>AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:5] MacroExit("DAHDI/1-1", "") in new stack
-- Executing [600@ext-group:12] Set("DAHDI/1-1", "RingGroupMethod=memoryhunt") in new stack
-- Executing [600@ext-group:13] Macro("DAHDI/1-1", "dial,10,tr,205-200-204-201") in new stack
-- Executing [s@macro-dial:1] GotoIf("DAHDI/1-1", "1?dial") in new stack
-- Goto (macro-dial,s,3)
-- Executing [s@macro-dial:3] AGI("DAHDI/1-1", "dialparties.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
dialparties.agi: Starting New Dialparties.agi
dialparties.agi: Caller ID name is 'unknown' number is 'unknown'
dialparties.agi: Methodology of ring is 'memoryhunt'
-- dialparties.agi: Added extension 205 to extension map
-- dialparties.agi: Added extension 200 to extension map
-- dialparties.agi: Added extension 204 to extension map
-- dialparties.agi: Added extension 201 to extension map
-- dialparties.agi: Extension 205 cf is disabled
-- dialparties.agi: Extension 200 cf is disabled
-- dialparties.agi: Extension 204 cf is disabled
-- dialparties.agi: Extension 201 cf is disabled
-- dialparties.agi: Extension 205 do not disturb is disabled
-- dialparties.agi: Extension 200 do not disturb is disabled
-- dialparties.agi: Extension 204 do not disturb is disabled
-- dialparties.agi: Extension 201 do not disturb is disabled
-- dialparties.agi: Filtered ARG3: 205-200-204-201
-- <DAHDI/1-1>AGI Script dialparties.agi completed, returning 0
-- Executing [s@macro-dial:20] NoOp("DAHDI/1-1", "Returned from dialparties with hunt groups to dial ") in new stack
-- Executing [s@macro-dial:21] Set("DAHDI/1-1", "HuntLoop=0") in new stack
-- Executing [s@macro-dial:22] GotoIf("DAHDI/1-1", "1?a30") in new stack
-- Goto (macro-dial,s,26)
-- Executing [s@macro-dial:26] Set("DAHDI/1-1", "HuntMember=HuntMember0") in new stack
-- Executing [s@macro-dial:27] GotoIf("DAHDI/1-1", "0?a32:a35") in new stack
-- Goto (macro-dial,s,31)
-- Executing [s@macro-dial:31] GotoIf("DAHDI/1-1", "1?a36:a50") in new stack
-- Goto (macro-dial,s,32)
-- Executing [s@macro-dial:32] Set("DAHDI/1-1", "CTLoop=0") in new stack
-- Executing [s@macro-dial:33] GotoIf("DAHDI/1-1", "0?a42") in new stack
-- Executing [s@macro-dial:34] Set("DAHDI/1-1", "CT_EXTEN=205") in new stack
-- Executing [s@macro-dial:35] Set("DAHDI/1-1", "DB(CALLTRACE/205)=unknown") in new stack
-- Executing [s@macro-dial:36] Set("DAHDI/1-1", "CTLoop=1") in new stack
-- Executing [s@macro-dial:37] Goto("DAHDI/1-1", "s,a37") in new stack
-- Goto (macro-dial,s,33)
-- Executing [s@macro-dial:33] GotoIf("DAHDI/1-1", "1?a42") in new stack
-- Goto (macro-dial,s,38)
-- Executing [s@macro-dial:38] Dial("DAHDI/1-1", "SIP/205,10,trM(auto-blkvm)") in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
== Using SIP VRTP TOS bits 136
== Using SIP VRTP CoS mark 6
-- Called 205
[Mar 11 08:58:14] DEBUG[4146]: pbx.c:3198 ast_hint_extension: FONALITY: This thread has already held the conlock, skip locking
-- SIP/205-00000048 is ringing
== Spawn extension (macro-dial, s, 38) exited non-zero on 'DAHDI/1-1' in macro 'dial'
== Spawn extension (ext-group, 600, 13) exited non-zero on 'DAHDI/1-1'
-- Hungup 'DAHDI/1-1'
[Mar 11 08:58:21] DEBUG[4146]: pbx.c:3198 ast_hint_extension: FONALITY: This thread has already held the conlock, skip locking

Here are the two channels compared channel 1 is the one that does not work.
trixbox1*CLI> dahdi show channel 1
Channel: 1LI>
File Descriptor: 20
Span: 11*CLI>
Extension: I>
Dialing: noI>
Context: from-pstn
Caller ID: I>
Calling TON: 0
Caller ID name:
Mailbox: none
Destroy: 0LI>
InAlarm: 0LI>
Signalling Type: FXS Kewlstart
Radio: 0*CLI>
Owner: <None>
Real: <None>>
Callwait: <None>
Threeway: <None>
Confno: -1LI>
Propagated Conference: -1
Real in conference: 0
DSP: no1*CLI>
Busy Detection: no
TDD: no1*CLI>
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no
Pulse phone: no
DND: no1*CLI>
Echo Cancellation:
trixbox1128 taps
trixbox1(unless TDM bridged) currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Hookstate (FXS only): Offhook
trixbox1*CLI> dahdi show channel 2
Channel: 2LI>
File Descriptor: 21
Span: 1
Extension:
Dialing: noI>
Context: from-pstn
Caller ID:
Calling TON: 0
Caller ID name:
Mailbox: none
Destroy: 0LI>
InAlarm: 0
Signalling Type: FXS Kewlstart
Radio: 0*CLI>
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Busy Detection: no
TDD: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no
Pulse phone: no
DND: no1*CLI>
Echo Cancellation:
128 taps
trixbox1(unless TDM bridged) currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Hookstate (FXS only): Offhook
Also the error on boot: Power alarm on Module 4, Resetting! CH3 and 4 are FXS cards. when I tested they actually worked but I get the error on boot. Should I remove the card in CH4 / Module 3?

i] Last edited by micpet at 2011-3-14 12:25 [/i
Time to create page: 0.040 seconds
Powered by Kunena Forum