keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about B100/200/400/800 ISDN BRI Cards

Need help for B200M

15 years 9 months ago #1526 by james.zhu
hello,
i think the isdn4bsd in askozia can not support our B200M well. the version of isdn4bsd must be updated. svn version of isdn4bsd has supported B200M.
regards!
james.zhu

15 years 9 months ago #1529 by osa2
What software can I use ?

The alix board and the b200m cannot be changed the askozia software can.
Is there a software package wich works with the b200m and the alix 3c board?

Best regards,

Wim Van Clapdurp
15 years 9 months ago #1533 by james.zhu
hello,
you can try voyage-linux, but you have to do many things for working system.
please check from:
openvox.com.cn/downloadsFile/ix100_Alix2c2_voyage-linux.pdf
regards!
James.zhu

15 years 9 months ago #1534 by osa2
When I connect my B200M with the isdn equipement from my provider.
Should the led lights light up?

Should one of the leds work?
I'm in Belgium How to figure out I have TE or NT??

Best regards
15 years 9 months ago #1535 by james.zhu
hello,
i think you have to set the ISDN from GUI. you can refer this:
forums.digium.com/viewtopic.php?p=67426&...1d46116b40176881bf47 .
regards!
James.zhu

15 years 9 months ago #1536 by osa2
How can we test that the card is working?

I don't know if it is working. The leds don't work.
I have everything in TE mode and have everything in NT mode doesn't work.
I have the additional power supply.

Is the power supply needed to let the B200M work? I have connected it but the card doesn't seem to work.

It is however recognized by askozia. When I try to make a call to the isdn number I get no answer signal.
Time to create page: 0.037 seconds
Powered by Kunena Forum