keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about B100/200/400/800 ISDN BRI Cards

B800p with bristuff

15 years 6 months ago #2120 by sebek72
I'm havin a problem to configure OpenVox B800p card.
Our server used to use Junghanss Quadbri, not we switched to openVox.

I'm having problem loading modules for the card.
root@telman:/home/voip/bristuff-0.3.0-PRE-1q/zaphfc# make load
make -C /usr/src/linux-2.6 SUBDIRS=/home/voip/bristuff-0.3.0-PRE-1q/zaphfc ZAP=-I/home/voip/bristuff-0.3.0-PRE-1q/zaptel modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.15-25-686'
  Building modules, stage 2.
  MODPOST
*** Warning: "zt_register" [/home/voip/bristuff-0.3.0-PRE-1q/zaphfc/zaphfc.ko] undefined!
*** Warning: "zt_transmit" [/home/voip/bristuff-0.3.0-PRE-1q/zaphfc/zaphfc.ko] undefined!
*** Warning: "zt_receive" [/home/voip/bristuff-0.3.0-PRE-1q/zaphfc/zaphfc.ko] undefined!
*** Warning: "zt_ec_chunk" [/home/voip/bristuff-0.3.0-PRE-1q/zaphfc/zaphfc.ko] undefined!
*** Warning: "zt_unregister" [/home/voip/bristuff-0.3.0-PRE-1q/zaphfc/zaphfc.ko] undefined!
make[1]: Leaving directory `/usr/src/linux-headers-2.6.15-25-686'
modprobe zaptel
insmod ./zaphfc.ko
ztcfg -v

Zaptel Configuration
======================

SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 3: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 4: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 5: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 6: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 7: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 8: CCS/ AMI Build-out: 399-533 feet (DSX-1)

20 channels configured.

ZT_SPANCONFIG failed on span 1: No such device or address (6)
make: *** [loadlinux26] Error 1

and if i try this
root@telman:/home/voip/bristuff-0.3.0-PRE-1q/zaphfc# ztcfg -vvvv

Zaptel Configuration
======================

SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 3: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 4: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 5: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 6: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 7: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 8: CCS/ AMI Build-out: 399-533 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: D-channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: D-channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: D-channel (Default) (Slaves: 12)
Channel 13: Clear channel (A-law) (Slaves: 13)
Channel 14: D-channel (Default) (Slaves: 14)
Channel 15: Clear channel (A-law) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (A-law) (Slaves: 17)
Channel 18: D-channel (Default) (Slaves: 18)
Channel 19: Clear channel (A-law) (Slaves: 19)
Channel 20: D-channel (Default) (Slaves: 20)

20 channels configured.

ZT_SPANCONFIG failed on span 1: No such device or address (6)
root@telman:/home/voip/bristuff-0.3.0-PRE-1q/zaphfc#

messages show:

Nov 4 15:11:17 localhost kernel: [17180633.752000] Zapata Telephony Interface Unloaded
Nov 4 15:12:38 localhost kernel: [17180715.068000] Zapata Telephony Interface Registered on major 196
Nov 4 15:12:38 localhost kernel: [17180715.068000] Zaptel Version: 1.2.6 Echo Canceller: KB1
Nov 4 15:13:21 localhost kernel: [17180757.584000] zaphfc: 0 hfc-pci card(s) in this box.
Nov 4 15:26:20 localhost kernel: [17181536.916000] zaphfc: stop
Nov 4 15:26:22 localhost kernel: [17181538.384000] zaphfc: 0 hfc-pci card(s) in this box.
Nov 4 15:26:26 localhost kernel: [17181542.980000] zaphfc: stop
Nov 4 15:26:30 localhost kernel: [17181546.684000] Zapata Telephony Interface Unloaded
Nov 4 15:26:41 localhost kernel: [17181557.792000] Zapata Telephony Interface Registered on major 196
Nov 4 15:26:41 localhost kernel: [17181557.792000] Zaptel Version: 1.2.6 Echo Canceller: KB1
Nov 4 15:26:55 localhost kernel: [17181572.032000] zaphfc: 0 hfc-pci card(s) in this box.


lspci shows:

0000:00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
0000:01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:01:01.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-8S] (rev 01)
0000:01:09.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)


How do we make the trasition form our old card to new one...
Anyone with a clue?

Thank you very much
15 years 6 months ago #2121 by admin
I think the right driver is qozap.ko . zaphfc.ko is the driver of 1port ISDN card.

Please scan
www.openvox.com.cn/downloadsFile/1195091231.pdf
15 years 6 months ago #2122 by sebek72
but lspci recognizes the card as:

0000:01:01.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-8S] (rev 01)

Any specific hit how to disable old modules and enable new ones?

Thank you.
15 years 6 months ago #2124 by james.zhu
hello:
the info is for B800P. could you patch the file for B800P? make sure compile the bristuff with patch for B800 and without error.
regards!
James.zhu

15 years 6 months ago #2127 by sebek72
I tried using qozap.c (openvox patch) and recompiling briistuff.
(it warned me, that in have some modules installed from before) other than that i went ok. i'm using
bristuff-0.3.0-PRE-1q

but the ztcfg -vvvv still gives me:

ZT_SPANCONFIG failed on span 1: No such device or address (6)

this is a part of compile log:

/root/bristuff-0.3.0-PRE-1v/qozap/qozap.c:1870: error: ‘struct qoz_card’ has no member named ‘st_sync’
make[2]: *** [/root/bristuff-0.3.0-PRE-1v/qozap/qozap.o] Error 1
make[1]: *** [_module_/root/bristuff-0.3.0-PRE-1v/qozap] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.15-25-686'
make: *** [linux26] Error 2
install -D -m 644 qozap.ko /lib/modules/`uname -r`/misc/qozap.ko
install: cannot stat `qozap.ko': No such file or directory
make: *** [installlinux26] Error 1
****************************************************
quadBRI driver installed.
Press <Enter> to continue, or <CTRL> + <C> to abort.
****************************************************



What am i doing wrong?

Thanks.
15 years 6 months ago #2129 by james.zhu
hello:
i think you have a compilation error there, you have to solve that. if possible, please follow the installation procedures exactly. it will cause the error if use different versions of bristuff.
regards!
James.zhu

Time to create page: 0.045 seconds
Powered by Kunena Forum