keywords: ip pbx voip gateway gsm gateway



The forum is in read only mode.
× Questions about D110/210/410 T1/E1/J1 PRI Cards

Outbound Callerid

12 years 7 months ago #7490 by dakudai

I had implement a system by openvox D410p with asterisk 1.4 & zaptel 1.4 & chan_ss7 1.3.
It works very well!

I set my caller id as "131415" for example,
when system outbound to agents via circuit(TELECOM operate,ISUP).
Agents' mobile phone always show the caller id "0131415" .

I have modified the configration in ss7.conf about subservice and noa...
but caller id still shows "0131415".

Can anybody help me?
Thank you!
12 years 7 months ago #7492 by hua
Please provide SSH and add MSN This email address is being protected from spambots. You need JavaScript enabled to view it. . I will check it.

Best regards
12 years 7 months ago #7494 by Denins.Den
If you confirm the nature of your called number is subscriber, please modify l4isup.c in chan_ss7.
Find the function "isup_called_party_num_encode", then change like this:


param[0] = (is_odd << 7);
if (pvt->link->linkset->noa != -1)
param[0] |= (pvt->link->linkset->noa & 0x7f);
/* param[0] |= (is_international ? 4 : 3); */ // Comment this line
param[0] |= 1; // Add this line
param[1] = 0x10; /* Internal routing allowed, ISDN number plan */


Test it then tell me the result, if you have any problem please feel free to contact me.
12 years 7 months ago #7508 by dakudai
Thanks! Denins,

I've modify the file, re-compiler and restart asterisk....

Unfortunately, It seems not work!

The CLI still shows "0131415" .
Should I upgrade chan_ss7 from 1.3 to 2.0 ?

i] Last edited by dakudai at 2011-11-1 11:14 [/i
12 years 7 months ago #7513 by Denins.Den
Please ask your Telco about this problem, they will tell you why your number
change to "0131......", then we can decide what should be modified
Time to create page: 0.035 seconds
Powered by Kunena Forum