keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about G400/G410 Cards.

G400P and B400P IRQ conflict

7 years 11 months ago #11078 by Spaze
Hello,
I am having 2 cards installed at the same server:
02:00.0 Unassigned class [ff00]: OpenVox Communication Co. Ltd. Device 0100 (rev 01)
        Subsystem: OpenVox Communication Co. Ltd. Device 0104
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=64K]
        Kernel driver in use: opvxg4xx
        Kernel modules: opvxg4xx

05:00.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)
        Subsystem: Cologne Chip Designs GmbH HFC-4S [OpenVox B200P / B400P]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at 2000 [size=8]
        Region 1: Memory at d0300000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: wcb4xxp

As you see, these cards are sharing the same IRQ. When I making a call and receiving an another call over a second card Asterisk is crashing.
I see the following in the /var/messages:
Jun 21 14:08:14 static kernel: dahdi: disable_span: span 5
Jun 21 14:08:14 static kernel: dahdi: disable_span: span 6
Jun 21 14:08:14 static kernel: dahdi: disable_span: span 7
Jun 21 14:08:14 static kernel: dahdi: disable_span: span 8
Jun 21 14:08:14 static kernel: wcb4xxp 0000:05:00.0: PCI INT A disabled
Jun 21 14:08:14 static kernel: wcb4xxp 0000:05:00.0: Driver unloaded.
Jun 21 14:08:14 static kernel: /proc/gsm_module_power_key-0 has been removed
Jun 21 14:08:14 static kernel: opvxg4xx: card 0 power off flag 0x0
Jun 21 14:08:21 static kernel: done.
Jun 21 14:08:21 static kernel: dahdi: disable_span: span 1
Jun 21 14:08:21 static kernel: dahdi: disable_span: span 2
Jun 21 14:08:21 static kernel: dahdi: disable_span: span 3
Jun 21 14:08:21 static kernel: dahdi: disable_span: span 4
Jun 21 14:08:21 static kernel: opvxg4xx: ===return from dead
Jun 21 14:08:21 static kernel: opvxg4xx 0000:02:00.0: PCI INT A disabled
Jun 21 14:08:21 static kernel: opvxg4xx: shutdown OpenVox G4XX GSM/CDMA cards.
Jun 21 14:08:21 static kernel: opvxg4xx 0000:02:00.0: Driver unloaded.

How can I resolve a problem? I tried changing the cards in different slots - same IRQ.

Thanks in advance!
7 years 11 months ago #11079 by hua
Hello,

Can you confirm if just use one of them working normal? It looks like G400 issue , Can you prepare teamviewer to us and add my skype ID "upper.hua" .
Time to create page: 0.029 seconds
Powered by Kunena Forum